Loaded Subwoofer Systems & Powered Subwoofer Systems by Kenwood and Rockford Fosgate

Click the store location below to call directly from your cell phone!

LOADED SUBWOOFER SYSTEMS 8”

Kenwood Kenwood Excelon

KENWOOD EXCELON 8” Oversized Shallow Subwoofer

Strong Magnetic Circuit
300W RMS Power
Vented Enclosure

PXW804B-X502-1

MSRP
~~$230.00~~
each

Regular SW Price
$199.99

2YearWarranty1

JBLlogo

JBL Compact powered subwoofer with 8" sub and 125-watt amp

powered subwoofer with heavy-duty ABS plastic enclosure
8" shallow-profile woofer
Class D amplifier (125 watts RMS)
10-gauge amp wiring kit required (sold separately)
controls:

low-pass crossover variable from 50-120 Hz at 12 dB per octave
variable bass boost (0 to +9 dB at 70 Hz)
phase switch (selectable 0 or 180 degrees)

speaker and line-level inputs
frequency response: 35-120 Hz
dimensions: 13-9/16"W x 2-7/8"H x 10-1/16"D
warranty: 1 year

BassProSL2

Special-shopping-icons

MSRP
~~$399.99~~
each

PRICE REDUCED
~~$349.99~~

LOADED SUBWOOFER SYSTEMS 10”

Rockford-Fosgate PUNCH

ROCKFORD FOSGATE Punch P1 10" ported enclosed subwoofer

ported hatchback-style enclosure with one 10" Punch P1 subwoofer
5/8" medium density fiberboard construction covered with black carpet
4-ohm total impedance
power handling: 50-250 watts RMS
peak power: 500 watts
frequency response: 25-250 Hz
sensitivity: 86 dB
17"W x 13.1"H x 16-5/8"D1 x 15.8"D2
warranty: 1 year

ROCKFORD FOSGATE Punch P1 12" ported enclosed subwoofer

Special-shopping-icons

MSRP
~~$309.99~~
each

PRICE REDUCED
$219.99

Rockford-Fosgate

ROCKFORD FOSGATE 10" Prime R2S Shallow Loaded Enclosure

Constructed with 5/8" MDF
Covered with high density carpet
High current binding posts
Power Handling: 200 Watts RMS, 400 Watts MAX
Dimensions: 13.5” x 19.0” x 5.25” (bottom), x 3.25” (top)
Speaker Connector: Up to 12 AWG Compression Terminals
Weight: 19.9 lbs
Nominal Impedance: 2-Ohm

ROCKFORD FOSGATE 10" Prime R2S Shallow Loaded Enclosure

Price Reduction

MSRP
~~$279.99~~
each

SPECIAL PURCHASE
$199.99

Kenwood Kenwood Excelon

KENWOOD EXCELON Shallow sealed enclosure with one 10" 4-ohm subwoofer

sealed downfiring enclosure with one 4-ohm 10" subwoofer
carbon glass fiber honeycomb cone
diecast aluminum basket
5/8" MDF construction with black carpet
power handling: 250 watts RMS (1000 watts peak)
frequency response: 35-800 Hz
sensitivity: 90 dB
push terminals accommodate up to 8-gauge wire
dimensions: 19-5/8"W x 12-1/4"H x 6"D
warranty: 2 years with Authorized Dealer Installation

KENWOOD eXcelon X Series mono subwoofer amplifier — 500 watts RMS at 2 ohms

mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
CTA-2006 compliant
Class-D amplifier design
variable low-pass filter (50-200 Hz at 24 dB/octave)
bass boost (0-18 dB at 40 Hz)
subsonic filter (25 Hz at 24 dB per octave)
optional wired remote level control available
preamp and speaker-level inputs
wiring and hardware not included with amplifier
fuse rating: 30A x 2
8-3/8"W x 2-13/16"H x 5-7/8"D
warranty: 2 years

P-XW1002B-X502-1

MSRP
~~$300.00~~
each

PRICE REDUCED
$249.99
2YearWarranty1

LOADED SUBWOOFER SYSTEMS 12”

Kenwood Kenwood Excelon

KENWOOD EXCELON Ported enclosure with one 12" 4-ohm subwoofer

ported enclosure with one 4-ohm 12" subwoofer
polypropylene cone with diamond array pattern and rubber surround
stress controlled spider
closed yoke speaker design for airflow control
5/8" MDF construction with 3/4" MDF baffle board
power handling: 300 watts RMS (2000 watts peak)
frequency response: 30-300 Hz
can be installed as front-, rear-, or down-firing
metal grille included
dimensions: 20-7/8"W x 15-13/16"H x 14-5/8"D x 11-3/8"D2
warranty: 2 years

KENWOOD eXcelon X Series mono subwoofer amplifier — 500 watts RMS at 2 ohms

mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
CTA-2006 compliant
Class-D amplifier design
variable low-pass filter (50-200 Hz at 24 dB/octave)
bass boost (0-18 dB at 40 Hz)
subsonic filter (25 Hz at 24 dB per octave)
optional wired remote level control available
preamp and speaker-level inputs
wiring and hardware not included with amplifier
fuse rating: 30A x 2
8-3/8"W x 2-13/16"H x 5-7/8"D
warranty: 2 years

KENWOOD EXCELON Ported enclosure with one 12" 4-ohm subwoofer X502-1

MSRP
~~$550.00~~
each

PRICE REDUCED
$399.99

2YearWarranty1

Rockford-Fosgate PRIME

ROCKFORD FOSGATE 12" Prime R2S Shallow Loaded Enclosure

Constructed with 5/8" MDF
Covered with high density carpet
High current binding posts
Power Handling: 250 Watts RMS, 500 Watts MAX
Dimensions: 13.5” x 27.375” x 5.25” (bottom), x 3.25” (top)
Speaker Connector: Up to 12 AWG Compression Terminals
Weight: 24.6 lbs
Nominal Impedance: 2-Ohm

ROCKFORD FOSGATE 12" Prime R2S Shallow Loaded Enclosure

Price Reduction

MSRP
~~$309.99~~
each

SPECIAL PURCHASE
$219.99

Rockford-Fosgate PUNCH

ROCKFORD FOSGATE 500W Peak, Punch P1 Single 12" Subwoofer Loaded Enclosure

ported hatchback-style enclosure with one 12" Punch P1 subwoofer
5/8" medium density fiberboard construction covered with black carpet
4-ohm total impedance
power handling: 50-250 watts RMS
peak power: 500 watts
frequency response: 25-250 Hz
sensitivity: 86 dB
19-1/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
warranty: 1 year

ROCKFORD FOSGATE 500W Peak, Punch P1 Single 12" Subwoofer Loaded Enclosure

Special-shopping-icons

MSRP
~~$339.99~~
each

PRICE REDUCED
$239.99

Kenwood Kenwood Excelon

KENWOOD EXCELON 12" ported subwoofer enclosure

ported enclosure with one 2-ohm 12" subwoofer
polypropylene cone with "dual area" dustcap
stress controlled spider
mesh grille included
5/8" MDF construction with 3/4" MDF baffle
down-firing design for greater output and more installation flexibility
power handling: 500 watts RMS (2000 watts peak)
impedance: 2 ohms
frequency response: 30-300 Hz
push terminals accommodate up to 8-gauge wire
dimensions: 20-7/8"W x 15-13/16"H x 14-5/8"D1 x 11-3/8"D2
warranty: 2 years

KENWOOD eXcelon X Series mono subwoofer amplifier — 500 watts RMS at 2 ohms

mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
CTA-2006 compliant
Class-D amplifier design
variable low-pass filter (50-200 Hz at 24 dB/octave)
bass boost (0-18 dB at 40 Hz)
subsonic filter (25 Hz at 24 dB per octave)
optional wired remote level control available
preamp and speaker-level inputs
wiring and hardware not included with amplifier
fuse rating: 30A x 2
8-3/8"W x 2-13/16"H x 5-7/8"D
warranty: 2 years

P-XW1221SHP-X502-1

MSRP
~~$600.00~~
each

Regular SW Price
$449.99

2YearWarranty1

Kenwood Kenwood Excelon

KENWOOD EXCELON Ported 2-ohm enclosure with two 12" subwoofers

ported enclosure with two 12" subwoofers
wired for 2 ohms total impedance
polypropylene cone with diamond array pattern
stress controlled spider
5/8" MDF construction with 3/4" MDF baffle
power handling: 600 watts RMS (2000 watts peak)
total impedance: 2 ohms
frequency response: 29-300 Hz
spring-post terminals accommodate up to 8-gauge wire
can be installed as front-, rear-, or down-firing
steel-mesh grilles included
dimensions: 35-3/4"W x 15-13/16"H x 15-13/16"D1 x 12-9/16"D2
warranty: 2 years

KENWOOD eXcelon X Series mono subwoofer amplifier — 500 watts RMS at 2 ohms

mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
CTA-2006 compliant
Class-D amplifier design
variable low-pass filter (50-200 Hz at 24 dB/octave)
bass boost (0-18 dB at 40 Hz)
subsonic filter (25 Hz at 24 dB per octave)
optional wired remote level control available
preamp and speaker-level inputs
wiring and hardware not included with amplifier
fuse rating: 30A x 2
8-3/8"W x 2-13/16"H x 5-7/8"D
warranty: 2 years

KENWOOD EXCELON Ported 2-ohm enclosure with two 12" subwoofers X502-1

MSRP
~~$700.00~~
each

PRICE REDUCED
$549.99

2YearWarranty1

Kenwood Kenwood Excelon

KENWOOD EXCELON 2-ohm ported enclosure with two 12" subwoofers

ported enclosure with two 12" subwoofers
polypropylene cone with "dual area" cap
stress controlled spider
5/8" MDF construction with 3/4" MDF baffle
down-firing design for greater output and more installation flexibility
power handling: 1000 watts RMS (2000 watts peak)
frequency response: 29-300 Hz
total impedance: 2 ohms
spring-post terminals accommodate up to 8-gauge wire
steel-mesh grilles included
dimensions: 35-3/4"W x 15-13/16"H x 15-13/16"D1 x 12-9/16"D2
warranty: 2 years

KENWOOD eXcelon X Series mono subwoofer amplifier — 500 watts RMS at 2 ohms

mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
CTA-2006 compliant
Class-D amplifier design
variable low-pass filter (50-200 Hz at 24 dB/octave)
bass boost (0-18 dB at 40 Hz)
subsonic filter (25 Hz at 24 dB per octave)
optional wired remote level control available
preamp and speaker-level inputs
wiring and hardware not included with amplifier
fuse rating: 30A x 2
8-3/8"W x 2-13/16"H x 5-7/8"D
warranty: 2 years

P-XW1221DHP-X502-1

MSRP
~~$500.00~~
each

Regular SW Price
$649.99

2YearWarranty1

8” SUBWOOFER SYSTEMS
with Built In Amplifier

Rockford-Fosgate PUNCH

ROCKFORD FOSGATE Punch 8" 300-Watt Powered Enclosure

powered ported subwoofer enclosure with 8" sub
Class D amplifier (300 watts RMS)
5/8" MDF enclosure with heat-activated vinyl finish
remote bass-level control included
quick disconnect connectors for easy removal
intelligent auto turn on/off function
separate low-level and speaker-level inputs
variable low-pass crossover (50-200 Hz, 12 dB/octave)
phase switch (0°, 180°)
variable bass boost
frequency response: 30-200 Hz
19-1/4"W (including wiring) x 11-3/8"H x 5-5/8"D (including grille)
warranty: 1 year

ROCKFORD FOSGATE Punch 8" 300-Watt Powered Enclosure

MSRP
~~$399.99~~
each

PRICE REDUCED
$279.99

PRIMA

Audison APBX 8R Passive Reflex 8" Sub Box 500 W

2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
Levelling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (9 mm, one-way).
Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
Water-repellent pressed paper 8 in. cone, featuring a profile developed with FEM and optimized with the Klippel Scan Vibrometer.
Specifically developed to be combined with either the AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
Sturdy metal grid included for a total protection of the subwoofer driver.
Warranty: 3 Years with Authorized Dealer Installation